Something is wrong with Audio to MIdi

Synthesizer V Studio
1

Hello.
I love synthesizer V. It’s good product.
By the way I usually use the function ‘extract notes from audio’ for making songs.

First, I record my voice audio file in Logic pro.
And then extract notes from audio in Synthesizer V.

However, the problem is that when the audio transitions to the notes at the end of the chorus, the last part, it converts to a ridiculously low-pitched sound. So, I tried increasing the volume by giving it more gain in Logic Pro just for that part, but I still get the same result.

Any idea why this is happening?

Of course, if it doesn’t work, I can re-record it and try again… but in the meantime, this situation is just too weird.

I usually use the default values when using this feature. Of course, the rest of the parts transitioned well except for the chorus.

2

check for noise etc which could be causing as well as the initial part of a noise where you are hitting a low pitch then rising. if you have Melodyne it’s easy to do a quick check on the audio (i use it to make sure i remove noise, excessive sibilance, breaths, and adjust pitch and vibrato) so the extract to notes goes much cleaner.

3

Thanks for replying. I have Melodyne too so I did steps as you mentioned. Now the problem part has more clear sound than initial part. But…It’s same result. :joy:

4

worst case, select those low notes and just raise them to the correct one. might be faster than re-recording etc.

5

:frowning: eah I already did that but those low notes were not corrected even though I tried to raise them. This case I should re-recording…:frowning:

6

I re-recorded it. It’s solved…lol

1 Like